- Contact Person : Ms. Jiang Jessica
- Company Name : Wuxi Shenkang Medical Instrument Equipment Co., Ltd.
- Tel : 86-0510-81763015
- Fax : 86-510-81701819
- Address : Jiangsu,Yixing,Chaoyang Road, Heqiao Town
- Country/Region : China
- Zip : 214211
Disposable Linear Cutter Stapler
Model:Surgical Linear Cutter Stapler
Application Operation:
general surgery, chest surgery, gynecology and thepanrenchyma excision, transaction, reforger and anastomose of pediatric operation.
Characters
--disposable use, avoid possibility ofcross infection;
--can strike for 8 times per appliance
--have special firing button, conduce to adjust position;
--have special firing button, conduce to operation left and right;
--have complete specification, suitable for diversified operation.
Technical Parameters
Model | Cutting Length(mm) | Suturing Length(mm) | Height of Nail(mm) | Number of Titanium Nail |
SYQ-55 | 55 | 57 | 3.8/4.2/4.5 | 56 |
SYQ-60 | 60 | 62 | 3.8/4.2/4.5 | 64 |
SYQ-75 | 75 | 77 | 3.8/4.2/4.5 | 76 |
SYQ-80 | 80 | 82 | 3.8/4.2/4.5 | 84 |
SYQ-100 | 100 | 102 | 3.8/4.2/4.5 | 104 |
Usage:
1.Firing
1.Push the black back cover lock to open the stapler
2.Take off the Catridge protective caps(yellow)
3.Put the tissues which need to be cuttered between Nail retainer clapm and Catridge clamp.If fot stapling,
Put the catridge and nail retainer seperately into two empty internal organs(bowels),and the two interfaces must be aligned.While the stapler can be operated seperately as left and right clamps,or the hinge can be connected in the back with the stapler,open the stapler in the front.Then press and close the handle when “knock”heared,the stapler is completely closed.
4.When the stapler is closed,the firing button can be turned over sidely to prepare for firing.
5.Press firing button forwardly to the end with thumb on the back of firing button and the other fingers round the
Apophysiary of the front part of the stapler
6.When firing ended,push the black back button to the original place.
7.Open the stapler by pressing the black back button,and close the operation from the operated parts.
2.Catridges change
1.If the catridge needs to be changed,open the stapler into left and right clamps.Hold the catridge clamp and clenche the near catridge then pull upwards and take out the catridge
2.Put the new catridge into the stapler with 30°-45° angle,then press downwards it into the stapler.Take off the protective cover,in this process,the catridge can be moved in the stapler.
Disposable Linear Cutter Stapler